Dydac Controls

TSD/TSG series have the built-in LED which displays the output voltage. This new design has special advantages, such as high accuracy, good shock-resistant, good reliability, strong anti-interference ability, small overall dimensions, light weight, clear reading, no parallax, remote viewing results.It always applies with our another product TSG V to control temperature of bottle blowing machine or other mechanical equipments. An intelligent voltage regulator with digits independent PV and SV displays.easy to read , and good quality

• Intelligent voltage regulator TSD-V is of 2 rows 3 digits independent PV and SV displays.
•  When used together with SCR,Triac voltage regulator can regulate the voltage across the load.
•  High quality and high accuracy voltage regulator

Technical data:

• Output impulse: Breadth value ≥ 3v, width ≥ 50us; S (when the load resistance is 20ohm)
•  Voltage setting range: 0-220v(or the voltage range you want)
•  Working environment: Temperature 0-50 degrees celsius, relative humidity does not exceed 85%, non-corrosive environment.
• Power supply: AC 220v /-15%, 50Hz /-1Hz; About 3va

Size:

• TSG-V 48x48x88mm
• TSA-V96*96*100mm
• TSD-V72*72*100mm
• TSG- 48*48*88

We are an eminent name in the process of designing and manufacturing that is widely used for various applications 

Features:

•  Soft start –   bake out feature prevents moisture at start up
• Current Limit , Phase Loss Trip, Over temperature Trip
• Microprocessor Digital Programmable Thyristor Power Controller with Percentage

Dydac Controls Thyristor  SCR Power Controllers | A sample of some typical applications:

• Plastic Extruders , Plastic Injection Moulding machines
• Thermoforming, textiles, industrial furnaces and ovens, extruders, kilns, chemical process heating, fast water heat.
• Paper and pulp drying, packaging machines, pharmaceutical processes, infrared ovens and dryers.
• High-temperature ovens and furnaces, kilns, glass, ceramics & high-temperature alloys.
• Large tank heating and mechanical relay replacement.
• High-speed paper and ink dryers, high temperature IR heating, high temperature materials processing.
• Primary of  transformer-coupled loads.
•  Phase angle proportional control. No temperature or power cycling
• I2T Rectifier fuses standard
• Isolated SCR's
• Integrated thermal/mechanical design saves panel space
• Voltage protection - MOV capacitance
• 10 to 400 Ampere current ratings. Other Ratings Over 400 Amps Possible.
• Easy to install, test, service

We are an eminent name in the process of designing and manufacturing that is widely used for various applications 

The Athena Series RMB is a microprocessor-based, single-zone temperature controller specifically designed for runnerless molding applications. It features an easy-to-use operator keypad, two LED displays, and three discrete indicators for heat-current, alarm and manual mode. Athena’s mainframes are compatible with all D-M-E Company’s G SERIES and SMART SERIES,® ITC, MCS, YUDO® and INCOE® brand mainframes.
• Accepts Type J or Type K thermocouple input (jumper selectable)
• Auto-tuning, with adjustable proportional band and rate
• Bumpless auto/manual transfer
• CompuStep® bake out feature prevents moisture at startup
• Built-in loop break, short, open, and reverse thermocouple protection
• Built-in triac safety protection
• Ground-fault protection
• Preset alarms at 30° F (17°C)
• Jumper-selectable soft-start mode
• Current monitor feature displays average current to load
• SafeChangeTM “hot swap” feature allows safe removal and replacement of module
• CE compliant