Dydac Controls

• Microprocessor Based Auto –Tune PID Temperature Controller

• Accepts J ,K ,R, S, T Type Thermocouple

• ( Soft Start) bake out feature prevents moisture at startup

• Auto/Manual Transfer

• Accuracy of +/- 1 Deg. C.

• Internal Solid state triac, triggered by Phase angle Firing.

• Dual displays for Process and Set Temperatures

• High Speed Fuses 16 A protection Fuses.

• New Series with Short Circuit protection of Power Modules by C Curve MCB

• Latest Generation PID algorithm.

• Power Controller can take 3600 or 7200 Watts at 240 VAC

• In case of thermocouple Failure you can set the Power Manually by not stopping the production.

• Heaters life is extended to 10 times.

• PID Temperature controller has bar graph indication of percentage output going to heaters.

• PID Temperature Controller is CE Compliant and Phase Angle Power Controller is CE Compliant.

• The Power Controllers are Phase Angle Fired and are Variable Power Controllers which gives as much Power to the Heaters as required to maintain the Temperature thus saving the Energy ( Energy Conservation at Set Point) and increasing the life of Heaters and Less Production Break Down.

• Alarm Option for over shooting and under shooting of Temperature. In case Thermocouple Fails it will give Alarm

• Selection of Heater Current Load 16 Amps , 32 Amps

Features :

• Accepts type j thermocouple

• Bump less auto/manual transfer

• Compustep bake out feature prevents moisture at start up

• Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple

• Open thermocouple break protection with jumper selectable shutdown or average power output based on operation

• Preset alarms at 30°f (17°c)

• Safe change “hot swap” feature allows safe removal and replacement of module ce compliant

• 15 amps per zone

Features :

• Compatible with industry standards control modules and mainframes

• Accepts type J thermocouple

• Bumpless auto/manual transfer

• Compustep bake out feature prevents moisture at startup

• Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple

• Open thermocouple break protection with jumperselectable shutdown or average poweroutput based on operation

• Preset alarms at 30°f (17°c)

• Safechange “hot swap” feature allows safe removal and replacement of module compliant.

• Microprocessor Based Auto –
• Accepts J ,K ,R, S, T Type Thermocouple
• ( Soft Start) bake out feature prevents moisture at startup
• Auto/Manual Transfer
• Accuracy of /- 1 Deg. C.
• Internal Solid state triac, triggered by Phase angle Firing.
• Dual displays for Process and Set Temperatures
• High Speed Fuses 16 A protection Fuses.
• New Series with Short Circuit protection of Power Modules by C Curve MCB
• Latest Generation PID algorithm.
• Power Controller can take 3600 or 7200 Watts at 240 VAC
• In case of thermocouple Failure you can set the Pow
• production.
• BASED HOT RUNNER
• CONTROLLER
• Tune PID Temperature Controller d Power Manually by not stopping er the